Tuesday, November 23, 2010

Guide to Computer Beeps !!

Since I'm the "computer expert" among my friends and family, I often get those late night phone calls and e-mails asking me what's wrong with their computer. I'll be honest. It does get quite frustrating and annoying at times when people start off with "What did I do?" I understand that they're only asking me because they trust I can do a good job, and they really don't have anyone else to turn to.
When I start fixing a computer, 99% of the problems I see are software related. Most of the time it is you, the user that wrecks, breaks, crashes, or kills your computer. Sorry, I have to be blunt about it, but it's true. New processors, hard drives, video cards, memory and motherboards are just inanimate objects we can lay blame to.
Most of the time the main problem with these broken computers I tend to are due to too many programs loading up at start up. All those little programs add up, and sometimes eat up all the system resources.
Every now and then though, I do see a hardware problem and the first thing I do when I turn the computer on is listen to how it beeps.
When the computer makes those funny sound via the system speaker, it's not doing it because it wants to be heard. The computer is trying to talk to the operator/technician and tell them what's wrong. In testing computer components on and off for the last three to four years, I find that almost all motherboards adhere to the IBM BIOS standard beep codes... I think a few OEM's have developed their own or use Phoenix or AMI beep codes, but for the most part motherboard manufacturers uses the IBM based ones because they are grandfathered in.

Beep Code:Description of Problem:
No BeepsShort, No power, Bad CPU/MB, Loose Peripherals
One BeepEverything is normal and Computer POSTed fine
Two BeepsPOST/CMOS Error
One Long Beep, One Short BeepMotherboard Problem
One Long Beep, Two Short BeepsVideo Problem
One Long Beep, Three Short BeepsVideo Problem
Three Long BeepsKeyboard Error
Repeated Long BeepsMemory Error
Continuous Hi-Lo BeepsCPU Overheating


So as you can see, if your computer doesn't start up and starts beeping away like a mime you can start the process of figuring out what is wrong by stopping for a second and listening. From a single beep which tells you everything is okay, to three long beeps which indicate a keyboard error to the siren like Hi-Lo beeps that tell you the CPU is overheating - listening to your computer is good!
As you become more and more experienced with computers, friends and family will naturally start to bring sick computers to your door to fix. When that happens, or when your own machine suddenly stops working, try listening to it first and see if it tells you what's wrong. If you are able to diagnose the problem just by listening to it, you will surely impress all your computer friends!

Monday, November 22, 2010

Cisco Certification Journey- 22 Nov 2010

I had worked as a network engineer for only a year with only a degree in Engineering and I became somewhat good in handling the Windows servers as well as the Network switches and Routers,but something was missing...something quite important...the hunger to be better than the best !!
I got a kick in the month of June (nope, not literally ;) and I dont drink either lol ! )
I realised there was so much for me to do and this was the right time to start.
I read about various Cisco Certifications and I decided I need to go for it.
It wasnt just about earning more $$$ but also about having more knowledge.

June-2010
CCNA cleared with 949 ! (Basics about Networking)
Phew! I finally got over my fear and passed the CCNA. It was a cakewalk cuz I had a subject on Networking basics in the last year of my Engineering.
I was happy but my hunger for more certification grew more than ever.I was restless and I told my friends that I planned to go for other certifications.
They thought I went mad but they werent CCNA so I didnt expect them to understand the adrenaline flowing through me.I had a terrible experience learning from those stupid coaching institutes(Money-minting academies actually) but it taught me to not be dependent on others to teach, Thanks to the Internet, I found a lot of resources to clear my doubts from various forums.
I sat and pondered what next ? Imagine an archer aiming for Gold in Olympics with his eyes only set on the target....the targets are the minor goals and the Gold is the Success !!
Since my school days, I had always been amazed by Hackers, they actually know the system and about its working too well and they are geniuses in their own way...so I decided to go for Network Security.

Sept-2010
CCNA Security cleared with 988 ! (Intro to ASDM and Basic Security)
Yay! well nothing major but exams still give me nightmares :P
I now have 2 Cisco certis. to my credit and it feels quite good.
I studied videos and had prepared for this all by myself.
Before my CCNA Security, I had a job offer at a company which did System Audits and they offered me the monotonous profile of doing audits...well they got a heart attack, when they heard my expected salary: 400$ i.e 20,000 INR, the reason: 4 yr. experienced employees were paid that much, I was surprised and I had the urge to run away from their office.Thankfully, They hired someone else and I heaved a sigh of relief !

Oct-2010
CCSP-SNRS cleared with 988 ! (Security on Routers and Switches)
Wow ! My journey to CCSP has begun in full swing. I need to clear 3 more exams to be a CCSP.
I still have the uneasiness in my belly (nope! its not the food, my mom cooks well :P ) to be much more than this...I finally gave this exam after a lot of delay, which I compensated later.

Nov-2010
CCSP-SNAF cleared with 966 ! (Basics about ASA Firewall)
Yes! I heard that I am unofficially a CCSP in the IT World as I passed 2 off 4 CCSP papers.
But I would soon be giving the other two exams soon!

Thursday, November 18, 2010

Basic Computer Glossary

Basic Computer Terminology


access time - The performance of a hard drive or other storage device - how long it takes to locate a file.
active program or window - The application or window at the front (foreground) on the monitor.
alert (alert box) - a message that appears on screen, usually to tell you something went wrong.
alias - an icon that points to a file, folder or application (System 7).
apple menu - on the left side of the screen header. System 6 = desk accessories System 7 = up to 50 items.
application - a program in which you do your work.
application menu - on the right side of the screen header. Lists running applications.
ASCII (pronounced ask-key ) - American Standard Code for Information Interchange. a commonly used data format for exchanging information between computers or programs.
background - part of the multitasking capability. A program can run and perform tasks in the background while another program is being used in the foreground.
bit - the smallest piece of information used by the computer. Derived from "binary digit". In computer language, either a one (1) or a zero (0).
backup - a copy of a file or disk you make for archiving purposes.
boot - to start up a computer.
bug - a programming error that causes a program to behave in an unexpected way.
bus - an electronic pathway through which data is transmitted between components in a computer.
byte - a piece of computer information made up of eight bits.
card - a printed circuit board that adds some feature to a computer.
cartridge drive - a storage device, like a hard drive, in which the medium is a cartridge that can be removed.
CD-ROM - an acronym for Compact Disc Read-Only Memory.
Chooser - A desk accessory used to select a printer, or other external device, or to log onto a network.
Clipboard - A portion of memory where the Mac temporarily stores information. Called a Copy Buffer in many PC applications because it is used to hold information which is to be moved, as in word processing where text is "cut" and then "pasted".
Clock Rate (MHz) - The instruction processing speed of a computer measured in millions of cycles per second (i.e., 200 MHz).
command - the act of giving an instruction to your Mac either by menu choice or keystroke.
command (apple) key - a modifier key, the Command key used in conjunction with another keystroke to active some function on the Mac.
compiler - a program the converts programming code into a form that can be used by a computer.
compression - a technique that reduces the size of a saved file by elimination or encoding redundancies (i.e., JPEG, MPEG, LZW, etc.)
control key - seldom used modifier key on the Mac.
control panel - a program that allows you to change settings in a program or change the way a Mac looks and/or behaves.
CPU - the Central Processing Unit. The processing chip that is the "brains" of a computer.
crash - a system malfunction in which the computer stops working and has to be restarted.
cursor - The pointer, usually arrow or cross shaped, which is controlled by the mouse.
daisy chaining - the act of stringing devices together in a series (such as SCSI).
database - an electronic list of information that can be sorted and/or searched.
data - (the plural of datum) information processed by a computer.
defragment - (also - optimize) to concatenate fragments of data into contiguous blocks in memory or on a hard drive.
desktop - 1. the finder. 2. the shaded or colored backdrop of the screen.
desktop file - an invisible file in which the Finder stores a database of information about files and icons.
dialog box - an on-screen message box that appears when the Mac requires additional information before completing a command.
digitize - to convert linear, or analog, data into digital data which can be used by the computer.
disk - a spinning platter made of magnetic or optically etched material on which data can be stored.
disk drive - the machinery that writes the data from a disk and/or writes data to a disk.
disk window - the window that displays the contents or directory of a disk.
document - a file you create, as opposed to the application which created it.
DOS - acronym for Disk Operating System - used in IBM PCs.
DPI - acronym for Dots Per Inch - a gauge of visual clarity on the printed page or on the computer screen.
download - to transfer data from one computer to another. (If you are on the receiving end, you are downloading. If you are on the sending end, you are uploading ).
drag - to move the mouse while its button is being depressed.
drag and drop - a feature on the Mac which allows one to drag the icon for a document on top of the icon for an application, thereby launching the application and opening the document.
driver - a file on a computer which tells it how to communicate with an add-on piece of equipment (like a printer).
Ethernet - a protocol for fast communication and file transfer across a network.
expansion slot - a connector inside the computer which allows one to plug in a printed circuit board that provides new or enhanced features.
extension - a startup program that runs when you start the Mac and then enhances its function.
fibre channel - as applied to data storage and network topology - link to FC Glossary.
file - the generic word for an application, document, control panel or other computer data.
finder - The cornerstone or home-base application in the Mac environment. The finder regulates the file management functions of the Mac (copying, renaming, deleting...)
floppy - a 3.5 inch square rigid disk which holds data. (so named for the earlier 5.25 and 8 inch disks that were flexible).
folder - an electronic subdirectory which contains files.
font - a typeface that contains the characters of an alphabet or some other letterforms.
footprint - The surface area of a desk or table which is occupied by a piece of equipment.
fragmentation - The breaking up of a file into many separate locations in memory or on a disk.
freeze - a system error which causes the cursor to lock in place.
get info - a Finder File menu command that presents an information window for a selected file icon.
gig - a gigabyte = 1024 megabytes.
hard drive - a large capacity storage device made of multiple disks housed in a rigid case.
head crash - a hard disk crash caused by the heads coming in contact with the spinning disk(s).
high density disk - a 1.4 MB floppy disk.
highlight - to select by clicking once on an icon or by highlighting text in a document.
icon - a graphic symbol for an application, file or folder.
initialize - to format a disk for use in the computer; creates a new directory and arranges the tracks for the recording of data.
insertion point - in word processing, the short flashing marker which indicates where your next typing will begin.
installer - software used to install a program on your hard drive.
interrupt button - a tool used by programmers to enter the debugging mode. The button is usually next to the reset button.
K - short for kilobyte.
keyboard shortcut - a combination of keystrokes that performs some function otherwise found in a pulldown menu.
kilobyte - 1024 bytes.
landscape - in printing from a computer, to print sideways on the page.
launch - start an application.
Measurements (summary) -
*a bit = one binary digit (1 or 0) *"bit" is derived from the contraction b'it (binary digit) -> 8 bits = one byte
*1024 bytes = one kilobyte
*K = kilobyte
*Kb = kilobit
*MB = megabyte
*Mb = megabit
*MB/s = megabytes per second
*Mb/s = megabits per second
*bps = bits per second
i.e., 155 Mb/s = 19.38 MB/s
MB - short for megabyte.
megabyte - 1024 kilobytes.
memory - the temporary holding area where data is stored while it is being used or changed; the amount of RAM a computer has installed.
menu - a list of program commands listed by topic.
menu bar - the horizontal bar across the top of the Mac¹s screen that lists the menus.
multi finder - a component of System 6 that allows the Mac to multi task.
multi tasking - running more than one application in memory at the same time.
nanosecond - one billionth of a second. ( or, the time between the theatrical release of a Dudley Moore film and the moment it begins to play on airplanes).
native mode - using the computers original operating system; most commonly used when talking about the PowerPC can run software written for either the 80x0 systems, or the PowerPC¹s RISC code.
NuBus - expansion slots on the Mac which accept intelligent, self-configuring boards. NuBus is a different bus achitecture than the newer PCI bus and the boards are not interchangable.
operating system - the system software that controls the computer.
optical disk - a high-capacity storage medium that is read by a laser light.
palette - a small floating window that contains tools used in a given application.
partition - a subdivision of a hard drives surface that is defined and used as a separate drive.
paste - to insert text, or other material, from the clipboard or copy buffer.
PC - acronym for personal computer, commonly used to refer to an IBM or IBM clone computer which uses DOS.
PCI - acronym for Peripheral Component Interchange - the newer, faster bus achitecture.
peripheral - an add-on component to your computer.
point - (1/72") 12 points = one pica in printing.
pop-up menu - any menu that does not appear at the top of the screen in the menu bar. (may pop up or down)
port - a connection socket, or jack on the Mac.
Power PC - a processing chip designed by Apple, IBM and Motorola (RISC based).
Power Mac - a family of Macs built around the PowerPC chip.
print spooler - a program that stores documents to be printed on the hard drive, thereby freeing the memory up and allowing other functions to be performed while printing goes on in the background.
QuickTime - the Apple system extension that gives one the ability to compress, edit and play animation, movies and sound on the Mac.
RAM - acronym for Random-Access Memory.
reset switch - a switch on the Mac that restarts the computer in the event of a crash or freeze.
resize box - the small square at the lower right corner of a window which, when dragged, resizes the window.
RISC - acronym for Reduced Instruction Set Computing; the smaller set of commands used by the PowerPC and Power Mac.
ROM - acronym for Read Only Memory; memory that can only be read from and not written to.
root directory - the main hard drive window.
save - to write a file onto a disk.
save as - (a File menu item) to save a previously saved file in a new location and/or with a new name.
scroll - to shift the contents of a window to bring hidden items into view.
scroll bar - a bar at the bottom or right side of a window that contains the scroll box and allows scrolling.
scroll box - the box in a scroll bar that is used to navigate through a window.
SCSI - acronym for Small Computer System Interface.
SCSI address - a number between zero and seven that must be unique to each device in a SCSI chain. Fast and Wide SCSI devices will allow up to 15 SCSI Ids (hexidecimal); however, the length restriction (3 meters) is such that it is virtually impossible to link 15 devices together.
SCSI port - a 25 pin connector on the back of a Mac (native SCSI port); used to connect SCSI devices to the CPU. Some SCSI cards (like the ATTO) have a 68 pin connector.
SCSI terminator - a device placed at the end of a SCSI chain to complete the circuit. (some SCSI devices are self-terminating, or have active termination and do not require this plug).
serial port - a port that allows data to be transmitted in a series (one after the other), such as the printer and modem ports on a Mac.
server - a central computer dedicated to sending and receiving data from other computers (on a network).
shut down - the command from the Special menu that shuts down the Mac safely.
software - files on disk that contain instructions for a computer.
spreadsheet - a program designed to look like an electronic ledger.
start up disk - the disk containing system software and is designated to be used to start the computer.
surge suppressor - a power strip that has circuits designed to reduce the effects of surge in electrical power. (not the same as a UPS)
System file - a file in the System folder that allows your Mac to start and run.
System folder - an all-important folder that contains at least the System file and the Finder.
32 bit addressing - a feature that allows the Mac to recognize and use more than 8MB of memory.
title bar - the horizontal bar at the top of a window which has the name of the file or folder it represents.
upload - to send a file from one computer to another through a network.
Uninterruptible Power Source (UPS)- a constantly charging battery pack which powers the computer. A UPS should have enough charge to power your computer for several minutes in the event of a total power failure, giving you time to save your work and safely shut down.
UPS - acronym for Uninterruptible Power Source.
vaporware - "software" advertised, and sometimes sold, that does not yet exist in a releasable for.
virtual memory - using part of your hard drive as though it were "RAM".
WORM - acronym for Write Once-Read Many; an optical disk that can only be written to once (like a CD-ROM).
zoom box - a small square in the upper right corner of a window which, when clicked, will expand the window to fill the whole screen.

Common PC terms

CPU
CPU stands for central processing unit. This is where all the computer's data processing is handled - all the data manipulation, calculations and formatting data for output. When you buy a computer you will become more focused on the CPU and its capabilities.

The execution of the instructions within the computer system is extremely fast and is measured in cycles of time and referred to as megahertz. For this reason the Mhz of a computer’s processor is sometimes referred to as it’s clock speed. Think of CPUs (and aligned circuitry) pulsing like a heart, this pulsing is expressed as "MHz" e.g. 2400Mhz.

The CPU pulsing is turning electrical current on and off. An electrical circuit can be either open or closed, and the power is either running through or not; that is, it is either on or off. This two-state situation is called binary, and the two states are controlled by binary digits or bits. The two bits of a computer are zero and one. For you to talk to your computer your message must be translated into binary form, a series of ones and zeros.

The CPU is located usually around the centre of the motherboard, and under a giant fan employed to keep it cool. The motherboard is the main piece of circuitry of your computer. It houses the CPU, the ROM and RAM, a variety of computer cards for receiving signals from other input devices, the power supply, hard drive and so on.

When buying computer you may choose between AMD processors and Intel processors. AMD and Intel a computer chip manufacturers. They have ben vying for market share for some years now. Each manufacturer has different ranges of processors aimed at different markets and applications. E.g. AMD's Semperon and Intel Celebrant were both entry level processors shipped in budget systems. Generally speaking the greater the speed of a computer the more expensive it will be.

The term CPU is sometimes used to refer to the case that houses the computers components, but technically the CPU is only one chip inside the computers case. The case is sometimes described as the "tower" which means the case stands on the floor on its narrow side. Whereas a "desktop" machine sits on your desk and generally has the monitor placed on it.


 Return to top

RAM
RAM means "ready access memory" (or sometimes "ready access memory"). It is like a temporary notepad where your computer sends information it has processed before writing it to disk, or where instructions from other input devices (keyboard, mouse floppy drive) are stored. The words "random access" indicate that memory locations in RAM are accessible in any order unlike sequential access of a data cassette tape, for example.

 Return to top

Hard Disk Drive
Your computers hard disk drive is like an audio CD that you have at home - accept the your computer can read and write to it. On other words, your computer can take data off your hard drive (to process it in the CPU or place it in RAM to work with) or it can record the results of the work it does back to the disk, this is called "writing to disk". The abbreviation HDD means "hard disk drive".

If you opened up your HDD (not recommended as this usually voids the manufacturer's warranty), you would find a pancake stack on double sided disks.

Each side of each disk had a arm that holds a "head". The head is responsible for writing data to the disk. When you handle a disk, carry a computer or laptop you should be careful to not bang the case as this can force the heads to collide with the surface of the disk and potentially damage it.

Hard disks are "formatted" to make them writable In this process "clusters", "sectors" and a "file allocation table" are created. With these mechanisms the computer writes information to the disk and can retrieve it later.


 Return to top

Floppy Disk
You can also read and write data to a floppy disk. It is simply smaller than your HDD and portable - you can take it to another computer and read from it there. Floppy disks are sometimes known as "secondary storage devices". Today’s floppy disks are not floppy. They were called floppy originally because they used to be 5¼ inches in width and floppy. They could carry about 720kb of data. Today however floppy disks are smaller and rigid and can carry more data (1.44Mb).

New floppy drive options are appearing on the market. Zip disks by Iomega are high volume floppy system that allows you to store up to 250MB on a floppy-like cartridge.

Newer USB drives come in sizes up to 4GB and are much faster than either floppy or zip disks. They are smaller too, making them more portable (and prone to being lost). The write times to USB drives is very fast now making saving and backing up easier. The old floppies were also highly susceptible to damage and corruption. USB drives on the other hand are robust.

 Return to top

BIT, BYTES and BINARY
A bit stands for Binary Digit. A byte is 8 bits. A kilobyte (kb) is 1,000 bytes. A megabyte (MB) is approximately 1,000,000 bytes. A gigabyte (GB) 1,000,000,000 bytes - that’s a lot of bits!!!

A bit is the smallest information parcel on your computer. A computer file can be made up of many hundreds of bytes and many thousand of bits. The bits are like switches, the are represented by 0’s and 1’s. Characters on your keyboard are therefore represented by 1’s and 0’s, so a "P" may be 01010000 to your computer - it knows when it sees those on/off instructions that you mean to output a "P".

 Return to top

Hardware
Hardware is the term given to all the physical parts of a computer system. Hardware includes the monitor, the keyboard, the mouse, the main case which houses the RAM, CPU and the motherboard.

 Return to top

Software
Software is the term used to describe the instructions needed to make the computer work. Software is not tangible; you can not touch it. Software is also called a "program" and is a set of computer files that are used to perform various actions on the computer. You may have a program for word processing, for example. Software can be transported on compact disk and floppy disks, but usually sit on the computers hard drive waiting to be "run".

 Return to top

Operating System
Every computer needs a set of programs called the operating system to run the system and make all the other programs work. Your word processor, database or spreadsheet programs can not operate unless the operating system is present. Programs written for one operating system will not work on a different operating system.

Common operating systems include: Windows (current version is Vista), Linux (there are many versions aimed at different uses) and Macintosh OSX. Windows dominates

Windows Vista  18%
Windows XP 67 %
Windows 98 less than 1%
Windows 2000 1 %
Linux  4%
MacOS X 6%


 Return to top

ROM
ROM means read only memory. Your computer’s ROM is a chip on the motherboard that stores a permanent set of start-up instructions for your computer. The familiar term for ROM is "BIOS", short for "basic input output system".

ROM is sometimes referred to as "firmware" (as opposed to software) because it is permanently housed inside the hardware. Instructions in ROM remain intact when the power is off.

Generally you can not alter the information in ROM; it is fixed at the time of manufacture. Some manufacturers provide updates to the ROM of their chips. The process of installing these updates is called "flashing the bios". This is only recommended for advanced users and only after all other avenues of repair are explored.

Your audio CDs at home are ROM, meaning you can only play them, or "read" them, but not record on them or "write" to them.

 Return to top

Input Devices
An input device is anything used to give a command or information to your computer.

1. The Keyboard
The big flat thing you type on. The keys are arranged much like those of a type writer, except a computer keyboard has a row of "function" keys that provided extra instructions for the computer e.g. F3 instructs the computer to find.

2. The Mouse
The mouse is a pointing device. It is often operated in conjunction with the keyboard. The mouse appears as a small, white arrow on the screen. When you move the mouse around on the "mouse pad", the white arrow makes the same movement on screen. The mouse allows you the place the cursor on the screen, block text and to drag and drop files.

For gamers the mouse can be replayed by a joystick or a console.

3. Other
Other common input devices may be a microphone, a scanner, a tape drive or a video camera. For WindowsMobile, a plain plastic stylus acts as the mouse.

Things that are plugged into the computer are often called "peripherals". The word peripheral when related to computers means "outside" or "external". Peripheral devices are hardware devices that are outside the systems unit but can be attached to it so that they can communicate with the CPU.

 Return to top

Output Devices
1. Printer
Prints a file to paper. A printer is likely to be a laser jet printer at work or an ink jet printer at home.

Ink jet printers thermally generate bubbles to eject streams of ink. The electrical current is generated by the printer’s microprocessor. This activates a tiny heating element in the ink nozzle. Intense heat causes the bubble to burst and spray ink onto the page. Provides cheap colour printing.

Laser printers beam a pattern of fine dots onto a rotating drum that is coated with light-sensing electrostatic material often called "toner". Electronically charged particles of toner are pressed onto the paper as it passes over the drum. The particles are then heated until they set. Laser printers are the most silent and produce very high quality printing.

2. Monitor
The Monitor or VDU ("visual display unit") provides a temporary way of outputting text or graphics. The visual display seen on the screen is actually a group of dots of light known as pixels (abbrev. from "picture elements"). The great the number of pixels, the greater the resolution of the image and the clearer and sharper the picture is.

3. Speakers
The speakers simply output sound. Speakers are plugged into a sound card attached to the motherboard. Sound cards vary in quality. Most modern sound cards provide stereo sound.

 Return to top

Modem
A modem is used to receive and send computer files over telephone lines. Modem means "mo"dulate and "dem"odulate. A modem is device for converting the analogue signal of a telephone line to a digital signal so your computer can understand it. And doing the reverse, taking the digital signal of your computer and turning it into an analogue signal. A modem can be internal - a card plugged into your computers motherboard, or external, a separate box plugged into one of the COMS ports of your computer. A modem’s speed is measure in kilobytes per second, or kbps.

Menus
In the Windows environment the user encounters, pop-up or drop down menus. A menu is a list of functions you can choose. They provide the user with quick access to some of your software’s more frequently used functions.

Look for "…" after menu options; this means there is another menu or a "sub-menu" under this option. Likewise for the character "u". Options that appear in pale gray on a menu can not be accessed. It get access to them you may have to highlight some text or a picture file.

Also note that there is an underscore under a letter of a menu option. This indicates that you can push the <Ctrl> key and that letter concurrently to activate a function rather than selecting it off the menu with several mouse clicks.

 Return to top

Types of Computers
1. Personal Computers
Personal computers or just the "PC" is a medium-sized, desktop computer. Today’s PCs are many, many times fastest and have much more storage capacity than their early forerunners. Today’s PC’s perform a huge range of functions that were barely conceived of only 10 years ago. Generally a PC is not connected to other computers or "networked" but it can easily be connected to a network with the edition of a network card and cables. A "Laptop" is a PC, but just smaller and therefore portable.

2. Personal Digital Assistants
Personal Digital or PDA is a small (they can be as small as pager or the size of a small paper back book) computing device with a cut-down operating system and cut-down applications. They are miniaturised computers with limited storage ability and no hard disk. All the files they need to operate, and the program files, are stored in RAM. Generally, today, they are "Internet ready" meaning that you can connect to the Internet with a PDA, send and receive mail and browse the World Wide Web.

3. Mainframe
A mainframe computer is a very large computer, sometimes taking up the space of a whole room. It can process very large amounts of data at very high speeds and is used by large companies and corporations and government departments. A mainframe may have many other computers or terminals attached to it so many people can use it at once.

Booting
The term "booting" refers to the start up of the computer and the loading of the required parts of the operating system into RAM.

When the computer is first switched on:

1: The permanent instructions residing in ROM start up. They test the machine to see that all the physically parts are present and working. BIOS information will be displayed on screen at this time (look for the rectangular box enclosed in double white lines).
2: The computer then carries out a quick test of the machine’s memory locations (see the RAM ticking over on screen).
3: Then the system will head to the hard disk drive or the C: drive and will start to load the operating system.
4: It finds the system files command.com, io.sys, msdos.sys and loads them into RAM.
5: If there are peripherals that windows does not recognise an autoexec.bat file will execute
6: Windows then loads over the top of DOS (disk operating system)

Tuesday, November 16, 2010

Assemble PC - PART 7

Windows 2000/XP Install

-All you need is the Windows XP/2000 CD in the CD-ROM and set in the bios to boot from CD as the first boot device.

-Press a key when prompted to, to start from the CD.

-The Windows setup screen will now appear.

-Follow the on-screen instructions and soon you will be prompted to create a hard disk partition to load windows onto, create one and format it using the NTFS file system.

-Continue to Load Windows
 
 
Windows 2000/XP

-When a new device is installed in your computer windows will automatically detect it.

-Windows will either find a driver for the device and install one on its own or it will ask you for drivers for it.

-Cancel this, grab the manufacturers disk, and put it in your CD/DVD Drive. It should auto start and then show a list of install options. Simply click install to install the device drivers, at the end a reboot would be required. After this reboot the device should be operational.

-If the manufactures disk doesn't have an auto run program and just simply provides the drivers on the disk, then you must not cancel the screen when it asks you to install the drivers. Instead click next. You can now do it two ways, let windows install the device automatically, or if you know where the drivers are you can select them manually. Windows recommends the first option and I agree, this should be used first, and if it doesn't succeed use the second option and browse the CD for the driver.
 
Voila... You have assembled your computer all by yourself and time to celebrate !! :)

Assemble PC - PART 6

Build a PC Troubleshooting

-Now if you are like me you screwed up somewhere. I will list some common mistakes and the answers. There is no way to list all of them of course. I hope your answer is in here.

-Problem: No signal to monitor?

-Solution: Check cable is the first suspect. Make sure it is attached to the card and seated correctly! With system shutdown and unplugged make sure Video Card is seated in its slot. Even the slightest movement can make it work incorrectly.

-Problem: Hard Drive or other drives not being found.

-Solution: Make sure the IDE cables themselves are installed correctly. Look at the IDE cable itself and take notice of how it is keyed. The red line on the wire should point to the power connector on the hard drive, CD-ROM, and even the floppy. Pay attention to the motherboard and the layout of the IDE connectors also.

-Problem: Floppy drive running constantly.

-Solution: Same as above make sure the cable is connected properly.

-Problem: indicator Lights not coming on, along with speaker and maybe even even power button not working.

-Solution: Make sure the and narrow down what lights work if any. Simply turn the leads around on there pins in another direction. You may just have them backwards. Refer to the motherboard manual again to insure proper placement. If you are not getting power to PC make sure you have the power lead to the motherboard and in right direction.

-Problem: Memory not counting or not as much as I installed.

-Solution: Make sure memory is seated correctly!

-Problem: Mouse not working or keyboard not working.

-Solution: Make sure they are in the right ps/2 port and not backwards. The system can boot with them backwards and not work correctly.

-Problem: My Computer is beeping like crazy! What is this?

-Solution: These are error codes. These are not the same for all systems. This indicates an error.


Assemble PC - PART 5

Hook Up Peripherals

-Normally I would say close the case and then hook up the peripherals but this is the real world. Unless you're perfect you have screwed up somewhere that will make it necessary to access inside of computer later. No offense of course, but it happens and its usually small stuff that gets you.

Mouse

-Your mouse will plug into the back of the computer along with everything else. You will notice small ports in the back where they fit in and noted by the I/O shield. Simply plug the connector into the USB port or PS/2 (usually green).

Keyboard

-The keyboard is like the mouse and usually hooks up next to mouse. (usually blue) Plug in snug and that's it.

Printer

-The printer uses the parallel port that is noted on I/O shield. Plug in and secure with the small screws on side of plug.

Sound

-You may want to hook your speakers and microphone into sound card. This is also noted on the back of sound card for the plug in's.

Monitor

-Hook up monitor and make sure that connector seats well. Be sure not to jar it to much, you can unseat the Video Card if it has a bad seat or not much of one.

Power

Go ahead and plug power connector into wall and then into the back of the power supply.

Build a PC double check

-Now if you made it this far you are ready to crank that little dude up. Before we do this we need to double check the work.

So I suggest you grab a notepad and mark all the things done and check them one by one .

Inside Case

-Make sure that all IDE Cables are seated and didn't move or unseat while installing other devices. Make sure they are keyed in the right direction and that the red lines faces power connector on drives. On the motherboard side the cable will be slotted to go in one direction.

-Check all power connectors make sure they are seated.

-Check all wiring and make sure they are out of way of any fans of sides of case were they may be caught.

-Make sure all drives are snug and tight.

-Make sure there is no play in motherboard itself and snug. Double check back of motherboard plate to insure no orphan brass standoff. This can cause a short.

-Insure all add in cards are snug and seated. Make sure RAM modules are seated well and snapped in place. 

Outside Case

-Double check all external wiring such as mouse, keyboard, monitor, and so on. Make sure they are snug into there connectors and seated.